Slip-On Flange

  SLIP-ON FLANGES continue to be preferred to welding neck flanges by many users on account of their initially lower cost, the reduced accuracy required in cutting the pipe to length, and the somewhat greater ease of alignment of the assembly; however their final installed cost is probably not much, if any, less than that of welding neck flanges. Their calculated strength under internal pressure is approximately two-thirds that of welding neck flanges, and their life under fatigue is about one-third that of the latter.
 
Specification:
Manufacturing standards: ANSI B 16.5, BS 1560. BS 10, IS 6392, B-2.1 NPT, API, DIN, JIS. MSS SP 44
Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904Letc.
Duplex Stainless Steel: UNS S31803, 2205 
Carbon Steel: ASTM A105/ A694 F42/ 46/52/56/60/65/70/A350 LF3/A350 LF2, etc.
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91 
Size: 1/8" NB to 48"NB 
Class: 150, 300, 400, 600, 900, 1500 & 2500
The surface forms: according to customer requirements
 
密封中信建投面型式 公称压力PN/MPa
(bar)
 0.6
(6)
 1.0
(10)
1.6
(16) 
2.5
(25)
 4.0
(40)
突面(RF)  DN10-300 DN10-600 DN10-150
凹凸面原油投资平台有哪些(MFM)  -  DN10-600
榫槽面(TG)
 全平恩瑞资本面(FF)  DN10-300  DN10-600 DN10-150 
 
密封开股指期货条件面型式 公称压中信建投力PN (MPa)
(Class)
Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500
突面(RF) DN15-600
(1/2"-24")
DN15-300
(1/2"-12")
凹凸面(MFM) - DN15-600
(1/2"-24")
DN15-300
(1/2"-12")
榫槽面(TG) - DN15-600
(1/2"-24")
DN15-300
(1/2"-12")
全平面(FF) DN15-600
(1/2"-24")
-
环连接面(RJ) DN25-600
(1/2"-24")
DN15-600
(1/2"-24")
DN15-300
(1/2"-12")